A written record of the electrical work done on a property is worth more than most people realize until the moment they need it. When a home in Paris goes on the market, when a landlord turns over a rental unit, or when an insurer asks what was done after a claim, that paperwork is what separates a clean transaction from a drawn-out one. We document every job, note what was found, what was replaced, and what code standard the work meets. That record travels with the property.
We handle that work for Paris and Bourbon County, covering everything from a single outlet replacement to a full panel upgrade or rewire. Whether you own a home you plan to sell, manage a rental property, or run a business that cannot afford electrical downtime, the job is scoped on the phone, priced before anything is scheduled, and documented when it is done.
Electrical problems rarely pick a convenient moment. A breaker that will not stay reset, an outlet that sparks, or a burning smell near the panel are not problems to put on a list for next week. We take urgent calls and schedule them the same way we schedule planned work: the problem is described on the call, the scope is confirmed, and a visit is arranged.
For tenants and businesses that need to stay operational, we plan around what is occupied and what is not. A fault on one circuit does not always require the whole property to go dark. We identify which part of the system needs attention and work within those limits wherever the wiring allows it. If a full shutdown is unavoidable, that is confirmed before the visit so the occupant can prepare.
The person who answers the phone can tell you what the visit involves. That conversation covers what to expect, what access is needed, and what the price looks like before anyone is sent out.
An intermittent fault is often harder to locate than a complete failure. A breaker that trips every few days, a light that dims when the refrigerator kicks on, or an outlet that works sometimes and not others all point to something that needs tracing rather than resetting. We work through the circuit systematically, testing at the outlet, the breaker, and points along the run until the source is identified.
Recessed lighting adds usable light without the visual weight of surface-mounted fixtures, and LED retrofits reduce the load on the circuit at the same time. Both involve more than swapping a bulb. The box, the wiring, and the circuit capacity all factor in. Where a ceiling box needs to be rated for a heavier fixture, or where a new switch leg needs to be run for independent control, that is part of the job.
A Level 2 charger needs a dedicated 240-volt circuit and a panel with enough available capacity to carry it. We check the panel first, confirm what amperage is available, and run the circuit to the garage or parking location before the charger is connected. If the panel needs a slot or a capacity upgrade first, that work happens as part of the same project.
Homes built in the 1960s and 1970s sometimes have aluminum branch-circuit wiring, and Paris has its share of that era's housing stock. The wiring itself is not the problem. The connections at outlets, switches, and fixtures are where aluminum behaves differently from copper, and where the risk sits. We identify what is in the walls before recommending a repair path, and the fix uses devices and connectors rated specifically for aluminum.
A smart switch or dimmer is a straightforward upgrade in a home with a neutral wire at the switch box. In older wiring, that neutral is often missing, and the switch has to be selected to match what is actually in the wall. We confirm the wiring before recommending a device, which avoids the flickering and buzzing that comes from pairing the wrong dimmer to the wrong circuit.
The price of a job depends on what the work actually involves at the address. A single outlet replacement is a different scope from a panel upgrade or a whole-home rewire, and the quote reflects that. Three things move the number: what the fault turns out to be once it is properly diagnosed, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made.
We do not post flat rates because the same symptom can have different causes, and a price that does not account for that is not a real price. What we do is give you the rate on the call, confirm what it covers, and let you decide before anything is put on the schedule. No pressure and no gimmicks, just safe, solid wiring and a price that is explained before the work starts. For a fuller picture of the job, see our electrical service list.
Call (859) 695-6995 and ask. The scope and the price are settled on the call.
In the older homes that make up a good portion of Paris's housing stock, the main panel is usually in a basement or a utility room, sometimes tucked behind a water heater or a shelf that was added later. Garages are common in mid-century builds. Knowing where to look, and what is likely to be blocking access, means the diagnostic starts faster.
Clear access to the panel before we arrive is the single thing that makes a visit go more smoothly than anything else. Move stored items, shelving, or anything leaning against the panel door. If the panel is in a finished space, note that on the call so we know what to expect.
Beyond panel access, having a clear description of the symptom ready, knowing which rooms or outlets are affected, and being able to point to where the problem started all reduce the time spent on diagnostics. Electrical work done to the standard the next inspection expects starts with a clean look at what is already there.
Not every electrical job requires the whole property to go dark. Replacing a single outlet, adding a circuit, or swapping a breaker typically requires only the affected circuit to be isolated, not the full panel. A homeowner working from home can usually stay connected while work happens elsewhere in the house.
Jobs that do require a full shutdown include panel replacements, service-entrance work, and any situation where the main breaker has to come off to work safely. When that is the case, we confirm it on the call before the visit is booked, so the household or business can plan around it. For a business trading through the day, we discuss what the schedule allows and work out the timing before anything is committed.
The duration of a shutdown depends on the scope. A panel swap is a longer outage than a breaker replacement. We tell you what to expect before the work begins, not after.
Electrical permits are generally required for work that changes the structure of the system: panel replacements, new circuit runs, service-entrance upgrades, and in some cases EV charger installations. Straightforward repairs and device replacements typically do not require one, but the rules vary by jurisdiction and the line is not always obvious.
We handle the permit filing where one is needed. The timing matters because an inspection has to be scheduled after the rough work is done and before anything is closed up. We factor that into the project timeline so the inspection does not hold up the finish. If you are not sure whether the job you have in mind needs a permit, ask on the call. We will tell you what generally applies to that type of work and confirm what is required for your address.
We cover Paris and Bourbon County, and the same work extends to North Middletown, Millersburg, Cynthiana, Winchester, and Georgetown. Residential and commercial calls from across that area are handled the same way: scoped on the phone, priced before the visit, and documented when the job is done.
If you are outside Paris proper and not sure whether your address is covered, call and ask. We will confirm it directly.
Not entirely, but we need a clear path to the areas where the work is happening. If there is heavy storage in the attic above the work area, clearing a path before the visit saves time on both sides.
For jobs that involve cutting into walls or ceilings, we take reasonable steps to contain the work area. The specifics depend on the job. Ask when you call and we will tell you what to expect.
We tell you what was checked, what was ruled out, and what the next diagnostic step would be. Some faults require a follow-up visit once more information is available, and we explain what that involves before you decide how to proceed.
Treat it as urgent and call right away. A burning smell near a receptacle or panel points to heat building up in the wiring or a connection, which can be a fault, an overloaded circuit, or an arcing condition. Do not reset breakers or continue using the affected circuit until the source is identified. We take urgent calls every day from 9:00 AM to 10:00 PM.
Homes from the mid-twentieth century often have panels that were sized for a fraction of the current electrical load, wiring that was never updated after a renovation, and outlets that are ungrounded or missing GFCI protection where it is now required. Aluminum branch-circuit wiring is also present in some properties from that era. A call describing what you are seeing is usually enough for us to scope the likely cause before the visit.
Call us and describe what is happening. If the same fault has returned, we want to know, and we will work out what the next step is on that call.
It depends on the scope. A single outlet or breaker repair usually does not require a shutdown. Work that involves the main panel or a full circuit shutdown may require taking part of the building offline temporarily. We scope that on the call so you know what to plan for.
Call and describe the window you have and what the work involves. We will confirm whether the schedule allows for it and what can realistically be completed in that time.
Permitted work is inspected by the local authority having jurisdiction, and we file the permit and coordinate the inspection as part of the job. Everything we do is documented so there is a record of what was replaced, what standard it was done to, and when. That documentation matters when a property is sold, rented, or reviewed by an insurer.
We trace the fault. We fix the wiring. We restore the power. That is the job, wherever in the area the call comes from.
Call (859) 695-6995 to get the scope and the price on the phone.
We are available every day from 9:00 AM to 10:00 PM. Reach out to Nicholasville Electrical Company and the price is confirmed before anything is scheduled.
Close by, we also take electrical work in: Winchester, Georgetown, Versailles, Wilmore, Frankfort.
Electrical problems do not always announce themselves clearly. A tripping breaker, a dead outlet, or a panel that cannot keep up with modern loads all point to work that needs to be done correctly the first time. We handle the full range of residential and commercial electrical work across Paris and Bourbon County, from a single outlet replacement to a complete service upgrade.
Call (859) 695-6995 to get the scope and the price before anything is scheduled.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Lighting Installation | Recessed LED and fixture installation, Outdoor and security lighting, Motion sensor wiring, Under-cabinet and landscape circuits | Homeowners upgrading fixtures or adding exterior lighting for security and visibility | Outdoor fixtures must be rated for wet or damp locations depending on placement. We confirm the right rating before the fixture goes up. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel installation, Load calculation included | Older homes adding EV chargers, appliances, or HVAC circuits that exceed current panel capacity | A load calculation is part of every panel job. We size the service to what the home actually draws, not just what it has now. |
| Electrical Safety Inspections | Panel and service entrance review, Outlet and grounding check, GFCI coverage audit, Written findings after the visit | Home buyers, sellers, landlords, and owners of older homes with unclear wiring history | Inspections come up most often before a sale or purchase, for rental compliance, and for homes where the wiring has not been looked at in decades. |
Call (859) 695-6995 and we will walk through what the job involves, confirm whether we cover your address, and give you the price before anything is scheduled.
(859) 695-6995